|
| ब्रांड नाम: | iBOSS |
| मॉडल संख्या: | पीएलए+मैट |
| एमओक्यू: | 48 किग्रा/रोल |
| मूल्य: | US$8/roll |
| भुगतान की शर्तें: | एल/सी, डी/ए, डी/पी, टी/टी, |
| आपूर्ति करने की क्षमता: | 10000000kg |
The iBOSS 3D Printer PLA+ Filament in Matte Red, with a 1.75mm diameter, is a premium choice for 3D printing. Made from high-quality PLA+ material, it offers enhanced strength and toughness compared to regular PLA filaments.
This 1kg spool contains approximately 340-350m of filament. Its dimensional accuracy of ±0.02mm ensures consistent feeding and stable prints. The matte red finish gives prints a unique, sophisticated look while hiding layer lines for a smooth surface.
| Attribute | Value |
|---|---|
| Print Temperature | 190-230℃ |
| Package Gross Weight | 1.400kg |
| Filament Diameter | 1.75mm |
| Spool Width | 55mm |
| Package Size | 21.00cm × 21.00cm × 7.00cm |
| State | Coiled |
| Model | PLA+ |
|---|---|
| Net Weight (KG) | 1KG |
| Gross weight | 1.3KG |
| Packing box size | 200×200×64mm |
| Diameter(mm) | 1.75mm |
| Tolerance(mm) | ±0.02mm |
| Print Temperature (ºC) | 200-230ºC |
| Base plat Temperature (ºC) | 60°C |
| Density | 1.23±0.05g/cm3 |
| Printing Speed | 40-100m |
| Melt Index | 14-18g/10min (190ºC,2.16kg) |
| Bubble | 100% without bubble |
| Length of Line (Ø 1.75±0.2mm) | 1.75mm=330m |
| Tensile strength | ≥62Mpa |
| Flexural modulus | 1970 Mpa |
| Izod Notch Impact Strength | 7KJ/m2 |
| Elongation at Break | 52 or 53 (ºC, 0.45Mpa) |
| Hydroscopicity | 0.005 |
| Reel Size | Ø20.0cm × 6.4cm H |
